Main geometry camera   Firewire 800 HDTV Resolution   1920 x1080 8 bits Lens mount   C (F with adaptor) Standard lens   Tamron aspheric 17-35 mm zoom lens Supported texture cameras   Canon 1000D/500D/450D/ 40D/50D/5D Mark II/ 1Ds Max texture resolution   12.4 megapixels Projector type   DLP Projector resolution   1280 x 800 Projector brightness   2500 ANSI Lumens Working Range Near (m)   0.7 Working Range Far (m)   4.5 Acquisition Time (sec)   0.3-1.5 Point to point distance (mm)   0.43 - 2.8 / 0.14 - 0.85 Point accuracy (mm)   0.05 (average) Deep Scan   Yes Turntable mode   Yes Canon scanning   Yes
Download Mephisto Extreme brochure here
Main geometry camera   Firewire 400 1 megapixel Resolution   1024 x768 8 bits Lens mount   C Standard lens   Computar 5-50 mm varifocal Supported texture cameras   Canon 1000D/500D/450D/ 40D/50D/5D Mark II/ 1Ds Max texture resolution   12.4 megapixels Projector type   DLP Projector resolution   1024 x 767 Projector brightness   2500 ANSI Lumens Working Range Near (m)   0.7 Working Range Far (m)   4.5 Acquisition Time (sec)   0.3-1.5 Point to point distance (mm)   0.52 / 3.7 Point accuracy (mm)   0.15 (average) Deep Scan   optional Turntable mode   optional Canon scanning   Yes
Download Mephisto Complete brochure here
Main geometry camera   Firewire 800 HDTV Resolution   1920 x1080 8 bits Lens mount   C (F with adaptor) Standard lens   Tamron aspheric 17-35 mm zoom lens Supported texture cameras   Canon 450D/ 40D/50D/5D Mark II/ 1Ds Max texture resolution   12.4 megapixels Projector type   DLP Projector resolution   1280 x 800 Projector brightness   2500 ANSI Lumens Projector Micro optics   2 stage dual coated conversion lens Working Range Near (m)   0.1 Working Range Far (m)   4.5 Acquisition Time (sec)   0.3-1.5 Point to point distance (mm)   0.03 - 2.8 / 0.14 - 0.85 Point accuracy (mm)   0.01 (average) Deep Scan   Yes Turntable mode   Yes Canon scanning   Yes
Multi system Mephisto setups could be based either on Mephisto Complete, Extreme or Micro scanners, retaining technical specifications of the scanner used. Two to eight scanners are supported in the system. Simple calibration procedure determines the position of each scanning system, allowing to produce pre-aligned scanning data - therefore saving time and effort to produce 360 models. For a body scanning application short throw projectors could be used, therefore reducing the space needed to rig the system. Dual scanners for face scanning could be mounted on a single aluminum or carbon rig or could be mounted on their individual tripods or mounting towers.
Width   36.5 cm Height   35.5 cm Length   36.5 cm       Motor type   Stepper 1/8 step resolution Motor holding torque   60 - 160 Ncm Power supply   built in 220/110 V       Connectivity   USB       Preset rotation angles   60, 30, 20, 10, 6 ,1.8 degrees
Turntable video here

Please contact us or distributor near you for more information about available 3D scanners or solutions. We will provide more information and instructional videos as soon as they become available. Demonstration sessions are also possible by arrangement with distributors.